Domus - Tiles, Stone, Wood & Engineered Flooring
Book a Visit

Search

Image search Find the closest match

Or select from one of ours

See more images
Product & Technical Brochure 1 190 x 1380 Size (mm) ELPE 121, 122, 123, 125, 127, 128, 129, 130, 131 & 132 ELPE 124 & 126 Colour Availability Thickness 8 Finish Extra Matt Silk Matt Swatch colours may vary from original. Samples should be requested. 1 Plank TitanX™ surface protection Registered embossed AquaSafe water-resistance 4-way bevel Class 33 Class 32 PEFC Internal use only. Suitable with underfloor heating Uniclic™ click system Recommended for floated or bonded installation 15 years Lifetime Lifetime Format: Treatment: Texture: Technology: Edge Detail: Durability: Certification: Application: Installation: Wet Warranty: Class 32 Warranty: Class 33 Warranty: Specification
Product & Technical Brochure Test results are based upon current test data provided by the manufacturer and are provided in good faith. Domus Group Ltd. cannot be held responsible for any variation in the test data due to changes in manufacture or material characteristics. Please refer to Domus Group Ltd. Terms & Conditions of Sale, September 2026. Compatible with underfloor heating systems subject to M50 installation advice available on request. Performance ∆ Lw ≈ 18dB (depending on used Pergo underlay) Suitable on a Pergo underlay (see instructions) < E0.5 ppm ≤ 2.0 kV Class Cfl-s1 (with all Pergo underlays) DS: µ ≥ 0.30 Impact sound reduction Floor heating Formaldehyde emission Anti-static Reaction to fire Thermal resistance Slip resistance Technical Characteristics Industry Standard ISO 712/2 EN 717-1 EN 1815 EN 13501-1 EN 12667 EN 13893 ENVIRONMENT, SAFETY & HEALTH
Product & Technical Brochure Performance ≥ 6000 cycles AC5 ≥ 70 mm (small ball) ≥ 750 mm (big ball) Charge ≥ 3N 20000 cycles: Type W (EN 12529) ≤ 15% (after 24h immersion at 20°C) ≥ 1 kN/m (Fl0.2 long side; Fmax long side) ≥ 2 kN/m (Fs0.2 short side; Fmax short side) No damage shall be visible, when tested with foot type 0 ≥ ≤ 0,05 mm residual indentation Class 5 (Group 1 & 2) Class 4 (Group 3) ≤ 0.15 mm (height differences) ≤ 0.20 mm (opening between joints) concave ≤ 0.50% (cupping in the length) convex ≤ 1.00% (cupping in the length) concave ≤ 0.15% (cupping in the width) convex ≤ 0.20% (cupping in the width) δ l average ≤ 0.9 mm δ w average ≤ 0.9 mm Class ≥ 4 (grey reference) < 3 (norm requirement) 1 (Pergo value) ≤ 0.3 mm (norm requirement) ≤ 0.03 mm (Pergo value) No requirement (norm requirement) No leakage (Pergo value) Abrasion resistance Abrasion class Impact resistance Scratch resistance Effect of a castor chair Thickness swelling Locking strength Effect of a furniture leg Surface soundness Static indentation Resistance to staining General appearance Dimensional variations after changes in relative humidity Light fastness Water resistance (qualitative rating for recovery swell) Water resistance (quantitative rating for recovery swell) Water resistance (joint leakage) Technical Characteristics Industry Standard ISO 24338 Prodecure A EN 13329 EN 17368 EN 13329 EN 438-2, 25 EN ISO 4918 (with underlay) ISO 24336 ISO 24334 EN ISO 16581 EN 13329 EN ISO 24343-1 EN 438-2 EN 13329 EN 13329 EN ISO 4892-2:2013 procedure B - cycle 2 or cycle 5 ISO 4760 ISO 4760 ISO 4760 PERFORMANCE & DURABILITY
Product & Technical Brochure 1 190 x 1380 Size (mm) ELPE 121, 122, 123, 125, 127, 128, 129, 130, 131 & 132 ELPE 124 & 126 Colour Availability Thickness 8 Finish Extra Matt Silk Matt Swatch colours may vary from original. Samples should be requested. 1 Plank TitanX™ surface protection Registered embossed AquaSafe water-resistance 4-way bevel Class 33 Class 32 PEFC Internal use only. Suitable with underfloor heating Uniclic™ click system Recommended for floated or bonded installation 15 years Lifetime Lifetime Format: Treatment: Texture: Technology: Edge Detail: Durability: Certification: Application: Installation: Wet Warranty: Class 32 Warranty: Class 33 Warranty: Specification
Product & Technical Brochure Test results are based upon current test data provided by the manufacturer and are provided in good faith. Domus Group Ltd. cannot be held responsible for any variation in the test data due to changes in manufacture or material characteristics. Please refer to Domus Group Ltd. Terms & Conditions of Sale, September 2026. Compatible with underfloor heating systems subject to M50 installation advice available on request. Performance ∆ Lw ≈ 18dB (depending on used Pergo underlay) Suitable on a Pergo underlay (see instructions) < E0.5 ppm ≤ 2.0 kV Class Cfl-s1 (with all Pergo underlays) DS: µ ≥ 0.30 Impact sound reduction Floor heating Formaldehyde emission Anti-static Reaction to fire Thermal resistance Slip resistance Technical Characteristics Industry Standard ISO 712/2 EN 717-1 EN 1815 EN 13501-1 EN 12667 EN 13893 ENVIRONMENT, SAFETY & HEALTH
Product & Technical Brochure Performance ≥ 6000 cycles AC5 ≥ 70 mm (small ball) ≥ 750 mm (big ball) Charge ≥ 3N 20000 cycles: Type W (EN 12529) ≤ 15% (after 24h immersion at 20°C) ≥ 1 kN/m (Fl0.2 long side; Fmax long side) ≥ 2 kN/m (Fs0.2 short side; Fmax short side) No damage shall be visible, when tested with foot type 0 ≥ ≤ 0,05 mm residual indentation Class 5 (Group 1 & 2) Class 4 (Group 3) ≤ 0.15 mm (height differences) ≤ 0.20 mm (opening between joints) concave ≤ 0.50% (cupping in the length) convex ≤ 1.00% (cupping in the length) concave ≤ 0.15% (cupping in the width) convex ≤ 0.20% (cupping in the width) δ l average ≤ 0.9 mm δ w average ≤ 0.9 mm Class ≥ 4 (grey reference) < 3 (norm requirement) 1 (Pergo value) ≤ 0.3 mm (norm requirement) ≤ 0.03 mm (Pergo value) No requirement (norm requirement) No leakage (Pergo value) Abrasion resistance Abrasion class Impact resistance Scratch resistance Effect of a castor chair Thickness swelling Locking strength Effect of a furniture leg Surface soundness Static indentation Resistance to staining General appearance Dimensional variations after changes in relative humidity Light fastness Water resistance (qualitative rating for recovery swell) Water resistance (quantitative rating for recovery swell) Water resistance (joint leakage) Technical Characteristics Industry Standard ISO 24338 Prodecure A EN 13329 EN 17368 EN 13329 EN 438-2, 25 EN ISO 4918 (with underlay) ISO 24336 ISO 24334 EN ISO 16581 EN 13329 EN ISO 24343-1 EN 438-2 EN 13329 EN 13329 EN ISO 4892-2:2013 procedure B - cycle 2 or cycle 5 ISO 4760 ISO 4760 ISO 4760 PERFORMANCE & DURABILITY

You may also like…